HANDA. NINGBO

Part group 05 / 05 · Ningbo, China

Threaded rods and studs,
cut and threaded to length.

Meter and cut rod, double-end studs, tap-end studs, and full-thread rod in the length you actually need instead of the length that comes in a box.

Send a drawing on WhatsApp Request a quote

Specification

Threaded Rods to drawing

Diameters
M3 to M30 metric, 1/8 to 1-1/4 inch. Other diameters quoted per drawing.
Lengths
Any cut length from 20 mm to 2 m, cut from coil or bar with a chamfered end.
Types
Full-thread rod, double-end stud, tap-end stud, reducing stud, hollow and slotted studs to drawing.
Materials
Carbon steel 4.8 / 8.8, stainless A2-70 and A4-80, brass, aluminium.
Finish
Blue zinc, clear zinc, hot-dip galvanised, black oxide, nickel, plain, passivation.

Every dimension is taken from your drawing or sample. Where this page and your drawing disagree, your drawing wins.

Where these parts go

Applications

Suspension, anchoring and clamping systems where the length is set by the site, not by the box.

Screws

Machine, self-tapping, self-drilling, set and security screws to drawing.

Open page

Bolts

Hex, socket, flange, carriage and special-head bolts, class 8.8 to 12.9.

Open page

Nuts & Washers

Hex, nyloc and cap nuts; flat, spring and lock washers in four materials.

Open page

Turned Parts

Pins, shafts, spacers, bosses and special components from bar stock.

Open page

Questions buyers ask

01
Do you cut to length or only sell standard lengths?
Both, and cut to length is the normal order here: you give the length in millimetres and the ends are chamfered so the thread starts cleanly.
02
Can the cut end be chamfered before threading?
Yes. Chamfering happens before rolling so the first thread is not flattened. Un-chamfered ends are possible if you cut the length yourself.
03
How do you check straightness?
On a granite table with a dial gauge. Long thin rod ships in a tube or a supported carton so the run holds in transit.
04
Are the threads rolled or cut?
Rods are thread-rolled, which is stronger than cutting because the grain follows the thread. Cut threads are used for large diameters and short studs.
05
What is the usual packing?
Bundled and strapped, in a wooden case or a strong carton with the ends protected. Over 1 m it ships in a case to prevent bending.
06
Do you supply the nuts to match?
Yes. Nuts, washers and rods are packed per set so the installer opens one box per fixing point.

Next step

Send one drawing.
Get a costed sheet.

Drawing or sample, material, quantity, and the destination port. We reply within one working day with unit price, tooling, lead time and shipping.

WhatsApp +86 150 5745 4081 yulonghua50@gmail.com RFQ form